Multiple Items Elements

Enhance your layouts using these powerful elements.

Multiple items elements can be found in the element library under Multiple Items. They display multiple content items where each item has a Title, Meta, Content, Image and Link content field. They offer powerful layout settings and often come with advanced effects. To learn more about general element settings, see the corresponding documentation.

Multiple items elements


Accordion Element

The Accordion element displays an accordion with a list of items. It has Title, Content, Image and Link fields. Take a look at the accordion element demo for a detailed showcase.

Show Accordion Demo

By default, the accordion starts with the first item opened and allows to only open one item at a time. Change the behavior to allow multiple items to be opened and to start with all items closed.

Accordion behavior

The accordion item image can be aligned in regard to the content. If aligned to the left or right, the image column width can be the same size as the image, a fixed width or percentage. Additionally, define the grid gaps and set the breakpoint from which the image stacks.

Image Option Description
Alignment Align the image to the top, left, right or place it between the title and the content.
Grid Width Define the width of the image within the grid. Choose between percent and fixed widths or expand columns to the width of their content.
Grid Column Gap Set the size of the gap between the image and the content.
Grid Row Gap Set the size of the gap if the grid items stack.
Grid Breakpoint Set the breakpoint from which grid items will stack.
Vertical Alignment Vertically center grid items.

Accordion image alignment

Options for the different content fields are very similar across all elements. They are described in the corresponding Text, Image and Button element documentation.


Button Element

The Button element displays one or multiple buttons within a grid. A button item has Content, Link and Icon fields. Take a look at the button element demo for a detailed showcase.

Show Button Demo

Each button item has various style options. It can look like a regular button or a link.

Button item style

If a button style is used, set the size for the button. Additionally, make the button take the full width.

Option Description
Size Set the button size.
Full width button Make the button take the full width.

Button size

Since the Button element can have multiple items, set the size of the column and row gaps between them.

Option Description
Column Gap Set the size of the column gap between multiple buttons.
Row Gap Set the size of the row gap between multiple buttons.

Button gaps

The button item can display an icon on the left or right of its content.

Button icon

There is an option to open a button link in a modal. This could be an image, video, or YouTube or Vimeo link. Any other link will be opened in an iframe.

Option Description
Link Target Open the link in a same or a new window or open it in a modal.
Modal Width/Height Set the width and the height of the modal content, i.e. image, video or iframe.

Button modal


Description List Element

The Description List element displays a description list. It has Title, Meta, Content and Link fields. Take a look at the description list element demo for a detailed showcase.

Show Description List Demo

The Description List element has various list options. For example, select a marker and its color, a list style as well as a padding between list items.

Option Description
Marker Select the marker of the list items.
Marker Color Select the color of the list markers. Mind that it is not supported in Chrome and Edge yet.
Style Set the list style.
Size Define the padding between items.
Columns Set the number of list columns.
Show dividers Show a divider between list columns.
Column Breakpoint Set the device width from which the list columns should apply.
HTML Element Choose between an ordered and unordered list to fit your semantic structure.

Description list settings

Define the layout of the title, meta and content. Choose between a grid layout to display the title, meta and content side by side or a stacked layout to stack them below each other.

Description list item layout

If a grid layout is selected, choose whether the title column width is the same size as the title, a fixed width or if it expands to fill the available space. Define the grid gaps and set the breakpoint from which the title stacks. Optionally, display a leader between the title and the content.

Title Option Description
Grid Width Define the width of the title within the grid. Choose between fixed widths or expand columns to the width of their content.
Leader Add a leader between the title and the content.
Grid Column Gap Set the size of the gap between the title and the content.
Grid Row Gap Set the size of the gap if the grid items stack.
Grid Breakpoint Set the breakpoint from which grid items will stack.

Description list title alignment

Align the meta text above or below title or content.

Description list meta alignment

Options for the different content fields are very similar across all elements. They are described in the corresponding Headline, Text and Button element documentation.


The Gallery element displays multiple Overlay elements within a grid. It has Image, Video, Title, Meta, Content, Link, Hover Image, Hover Video and Tags fields. Take a look at the gallery element demo for a detailed showcase.

Show Gallery Demo

The Gallery element has options to set the number of columns for each breakpoint. The Inherit option refers to the number of columns on the next smaller screen size. Auto expands the columns to the width of their items filling the rows accordingly.

Gallery columns

Set the size of the column and row gaps between gallery items. Optionally, show a divider between them.

Option Description
Column Gap Define the size of the gap between grid columns.
Row Gap Define the size of the gap between grid rows.
Show dividers Show dividers between gallery items.

Gallery column and row gaps

If the last row does not have enough columns, there is an option to center columns horizontally. If gallery items have different heights, they can be centered vertically.

Gallery alignment

Create a gap-free masonry layout if grid items have different heights. Pack items into columns with the most room or show them in their natural order.

Gallery masonry

Enable a parallax effect to move single grid columns at different speeds while scrolling. Define the vertical parallax offset in pixels. If grid columns have different heights, which is often the case for masonry grids, enable the parallax justify option to move columns while scrolling until they reach the bottom at the same time.

Gallery parallax

The parallax animation starts when the element enters the viewport and ends when it leaves the viewport. Optionally, set a start and end offset, e.g. 100px, 50vh or 50vh + 50%. Percent relates to the element's height.

Gallery parallax start and end

To filter the gallery items by tags, enable the filter navigation. Define the animation that will be applied to the content items when filtering between them, set the style for the filter navigation and position it in regard to content.

Option Description
Filter Enable filter navigation.
Animation Select an animation that will be applied to the content items when filtering between them.
Navigation Order Order the filter navigation alphabetically or by defining the order manually. Optionally, display the navigation in a reverse order.
Manual Order Enter a comma-separated list of tags to manually order the filter navigation.
Style Select the filter navigation style. The pill and divider styles are only available for horizontal Subnavs.
All Items Show filter control for all items.
Position Position the filter navigation at the top, left or right. A larger style can be applied to left and right navigation.
Alignment Align the filter controls.
Margin Set the vertical margin.
Grid Width Define the width of the filter navigation. Choose between percent and fixed widths or expand columns to the width of their content.
Grid Column Gap Set the size of the gap between between the filter navigation and the content.
Grid Row Gap Set the size of the gap if the grid items stack.
Grid Breakpoint Set the breakpoint from which grid items will stack.

Gallery filter

There is an option to open the gallery item links in a lightbox gallery. This could be an image, video, or YouTube or Vimeo link. Any other link will be opened in an iframe. Additionally, the title and content can be shown in the lightbox caption.

Option Description
Lightbox Enable lightbox gallery.
Image Width and Height Setting just one value preserves the original proportions. The image will be resized and cropped automatically, and where possible, high resolution images will be auto-generated.
Image Orientation Allow mixed image orientation. Width and height will be flipped accordingly, if the image is in portrait or landscape format.
Show Title Show the title in the overlay, lightbox or both.
Show Content Show the content in the overlay, lightbox or both.

Gallery lightbox

By default, all images are resized and cropped using the same width and height value no matter if they are in portrait or landscape mode. To mix both portrait and landscape images, enable mixed image orientation. Width and height will be flipped accordingly.

Gallery image orientation

Since the Gallery element displays multiple overlays, their settings are explained in the Overlay element documentation. Options for the different content fields are very similar across all elements. They are described in the corresponding Image, Headline, Text and Button elements.


Grid Element

The Grid element displays multiple Panel elements within a grid. A grid item has Title, Meta, Content, Image, Icon, Link and Tags fields. Take a look at the grid element demo for a detailed showcase.

Show Grid Demo

The Grid element has options to set the number of columns for each breakpoint. Inherit refers to the number of columns on the next smaller screen size. Auto expands the columns to the width of their items filling the rows accordingly.

Grid columns

Set the size of the column and row gaps between grid items. Optionally, show a divider between grid columns.

Option Description
Column Gap Define the size of the gap between grid columns.
Row Gap Define the size of the gap between grid rows.
Show dividers Show dividers between grid items.

Grid gaps and dividers

To align the images without any gaps when using a blank panel, use a panel padding instead of the grid column and row gaps.

Grid panel padding

If the last row does not have enough columns, there is an option to center them horizontally. If grid items have different heights, they can be centered vertically.

Grid alignment

Create a gap-free masonry layout if grid items have different heights. Pack items into columns with the most room or show them in their natural order.

Grid masonry

Enable a parallax effect to move single grid columns at different speeds while scrolling. Define the vertical parallax offset in pixels. If grid columns have different heights, which is often the case for masonry grids, enable the parallax justify option to move columns while scrolling until they reach the bottom at the same time.

Grid parallax

The parallax animation starts when the element enters the viewport and ends when it leaves the viewport. Optionally, set a start and end offset, e.g. 100px, 50vh or 50vh + 50%. Percent relates to the element's height.

Grid parallax start and end

To filter the grid items by tags, enable the filter navigation. Define the animation that will be applied to the content items when filtering between them, set the style for the filter navigation and position it in regard to content.

Option Description
Filter Enable filter navigation.
Animation Select an animation that will be applied to the content items when filtering between them.
Navigation Order Order the filter navigation alphabetically or by defining the order manually. Optionally, display the navigation in a reverse order.
Manual Order Enter a comma-separated list of tags to manually order the filter navigation.
Style Select the filter navigation style. The pill and divider styles are only available for horizontal Subnavs.
All Items Show filter control for all items.
Position Position the filter navigation at the top, left or right. A larger style can be applied to left and right navigation.
Alignment Align the filter controls.
Margin Set the vertical margin.
Grid Width Define the width of the filter navigation. Choose between percent and fixed widths or expand columns to the width of their content.
Column Gap Set the size of the gap between between the filter navigation and the content.
Row Gap Set the size of the gap if the grid items stack.
Grid Breakpoint Set the breakpoint from which grid items will stack.

Grid filter

There is an option to open the grid item links in a lightbox gallery. This could be an image, video, or YouTube or Vimeo link. Any other link will be opened in an iframe. Additionally, the title and content can be shown in the lightbox caption.

Option Description
Lightbox Enable lightbox gallery.
Width and Height Setting just one value preserves the original proportions. The image will be resized and cropped automatically, and where possible, high resolution images will be auto-generated.
Image Orientation Allow mixed image orientation. Width and height will be flipped accordingly, if the image is in portrait or landscape format.
Show Title Show the title in the panel, lightbox or both.
Show Content Show the content in the panel, lightbox or both.

Grid lightbox

Additionally, set an optional content width which doesn't affect the image if there is just one column.

Grid 1 column content width

There is an option to expand the height of the image, content or both to fill the available space in the panel and push the link to the bottom.

Grid expand content

Since the Grid element displays multiple panels, their settings are explained in the Panel element documentation. Options for the different content fields are very similar across all elements. They are described in the corresponding Headline, Text, Image, Icon and Button element documentation.


List Element

The List element displays a list. It has Content, Image, Icon and Link fields. Take a look at the list element demo for a detailed showcase.

Show List Demo

Choose between a vertical or a horizontal list. Horizontal lists have an option to set a separator between its items while vertical lists have options for the list marker, style and size.

List type

Choose between various markers and their color for vertical list items.

List marker

Select an icon from the UIkit icon library to use it as a list marker. Set the icon color and its width. Each item can also have a different icon. Alternatively, use the Image field to upload a custom image.

Option Description
Icon Click on the pencil to pick an icon from the SVG gallery.
Icon Color Set the icon color.
Icon Width Set the icon width.

List icon

The vertical list has various style options. Choose between the default, divider or a striped list as well as define a padding between list items.

List style and size

The list items can be divided into multiple columns. Optionally, show a divider between them.

Option Description
Columns Set the number of list columns.
Show Dividers Show dividers between list columns.
Column Breakpoint Set the device width from which the list columns should apply.
HTML Element Choose between an ordered and unordered list to fit your semantic structure. Optionally, wrap the list with the HTML nav element.

List columns

The list image can be aligned to the left or right of the content. If image and content have different heights, the image can be centered vertically.

List image alignment

Options for the different content fields are very similar across all elements. They are described in the corresponding Text, Image, Icon and Button element documentation.


Map Element

The Map element displays a map with markers and popups. It has Location, Title, Meta, Content, Image, Link, Marker Icon and Cluster Icons fields. By default, OpenStreetMap is used. To use Google Maps, set the Google Maps API key in the External Services settings of YOOtheme Pro. Take a look at the map element demo for a detailed showcase.

Show Map Demo

The Map element is available as a roadmap and a satellite map.

Map type

Set the zoom level, display map controls and enable map zooming and dragging. Additionally, define the maximum and a minimum zoom level of the map.

Option Description
Zoom Set the initial resolution at which to display the map. 0 is zoomed out, and 18 is at the highest resolution zoomed in.
Controls Display the map controls and define whether the map can be zoomed or dragged using the mouse wheel or touch.
Points of Interest Display points of interest for Google Maps.
Minimum Zoom Level Set the minimum zoom level of the map.
Maximum Zoom Level Set the maximum zoom level of the map.

Map zoom and controls

The Map element has several options to define its size. Set a fixed height in pixels or adapt it to the viewport.

Option Description
Viewport Height Adapt the map height to the height of the viewport. Optionally, subtract the height above the map. Make sure no height is set in the section settings when using one of the viewport options.
Height Set the map height in pixels.
Width Set the map width in pixels. If no width is set, the map takes the full width. If both width and height are set, the map is responsive like an image. Additionally, the width can be used as a breakpoint. The map takes the full width, but below the breakpoint it will start to shrink preserving the aspect ratio.

Map width and height

If Google Maps are used, there are additional options to style the map.

Option Description
Hue Set the hue, e.g. #ff0000.
Lightness Set percentage change in lightness (between -100 and 100). Optionally, invert lightness
Saturation Set percentage change in saturation (between -100 and 100).
Gamma Set percentage change in the amount of gamma correction (between 0.01 and 10.0 where 1.0 applies no correction).

Map style

Select a custom icon for the map markers. Enable marker clustering to simplify the display of a large number of markers on the map. Optionally, select a custom cluster icon.

Map custom marker

Map clustering

Display a popup when clicking a map marker. Set the max width for the popup.

Map Option Description
Popup max width Set a maximum width for the popup.

Map popup max width

Optionally define which popup is opened on load.

Item Option Description
Marker Hide marker.
Popup on load Show individual popup on load.

Map item popup

Options for the different content fields are very similar across all elements. They are described in the corresponding Headline, Text, Image and Button element documentation.

Note The JavaScript and therefore the map itself is loaded lazy which means when it enters the viewport.


The Nav element displays a vertical navigation. It has Content, Subtitle, Image, Icon and Link fields. Take a look at the nav element demo for a detailed showcase.

Show Nav Demo

Change the menu item type to Divider to separate menu items or Heading to group menu items for each item. When using dynamic content, create menu dividers and menu headings in WordPress.

Nav item type

Define which item should be the active item.

Nav item active

Choose the navigation style and size and show dividers between the nav items. Additionally, choose between a div and a nav HTML element to fit your semantic structure.

Nav style

The nav items can be divided into multiple columns with optional dividers between them. Additionally, select a device for the column breakpoint.

Option Description
Grid Set the number of grid columns.
Show dividers Show dividers between grid columns.
Column Breakpoint Set the device width from which the grid columns should apply.
Column Gap Set the size of the gap between the grid columns.
Row Gap Set the size of the gap between the grid rows.

Nav columns

Options for the different content fields are very similar across all elements. They are described in the corresponding Image elements.


Overlay Slider Element

The Overlay Slider element displays multiple Overlay elements in an image slider. It has Image, Video, Title, Meta, Content, Link, Hover Image and Hover Video fields. Take a look at the overlay slider element demo for a detailed showcase.

Show Overlay Slider Demo

The Overlay Slider element has options to set the item width for each breakpoint in percentage. Inherit refers to the item width on the next smaller screen size.

Overlay slider item width

Alternatively, expand all items to the width of their content. Choose whether the slider height adapts to its content or the viewport height.

Option Description
Item Width Mode Define whether the width of the slider items is fixed or automatically expanded by its content widths.
Viewport Height Adapt the slider height to its content or to the viewport height. Optionally, subtract the height above the slider. Make sure no height is set in the section settings when using one of the viewport options.
Min Height Use an optimal minimum height to prevent the slider to become smaller than its content on small devices.

Overlay slider height

Set the size of the column gap between slider items. Optionally, show a divider between them.

Overlay slider gap and dividers

Group slider items into sets and slide all visible items at once. The number of items within a set depends on the defined item width, e.g. 33% means that each set contains 3 items. Additionally, center the active slide, disable infinite scrolling or enable autoplay.

Option Description
Set Slide all visible items at once.
Center Center the active slide.
Finite Disable infinite scrolling.
Velocity Set the velocity in pixels per millisecond.
Autoplay Enable autoplay and optionally pause autoplay on hover.
Interval Set the autoplay interval in seconds.
Parallax Add a stepless parallax animation based on the scroll position.
Parallax Target The animation starts and stops depending on the element position in the viewport. Alternatively, use the position of a parent container.
Parallax Start / End The parallax animation starts when the element enters the viewport and ends when it leaves the viewport. Optionally, set a start and end offset, e.g. 100px, 50vh or 50vh + 50%. Percent relates to the element's height.

Overlay slider animation

Add a dotnav navigation and define its position and margin.

Option Description
Type Choose the navigation type.
Position Align the navigation items.
Margin Set the vertical margin.
Breakpoint Display the navigation only on this device width and larger.
Color Set light or dark color mode.

Overlay slider dotnav

Add an additional slidenav to navigate to the previous and next slides.

Option Description
Position Select the position of the slidenav. Optionally, only show the slidenav on hover and choose a larger style.
Margin Apply a margin between the slidenav and the slider container.
Breakpoint Display the slidenav only on this device width and larger.
Color Set light or dark color mode.
Outside Breakpoint Display the slidenav outside only on this device width and larger. Otherwise, display it inside.
Outside Color Set light or dark color if the slidenav is outside.

Overlay slider slidenav

By default, the overlay is always displayed. Alternatively, choose to only display it on hover or when the slide becomes active. Optionally, make only the first item active and animate the background only.

Overlay slider display

Since the Overlay Slider element displays multiple overlay, their settings are explained in the Overlay element documentation. Options for the different content fields are very similar across all elements. They are described in the corresponding Image, Headline, Text and Button elements.


Panel Slider Element

The Panel Slider element displays multiple Panel elements in an image slider. It has Title, Meta, Content, Image, Video, Icon and Link fields. Take a look at the panel slider element demo for a detailed showcase.

Show Panel Slider Demo

The Panel Slider element has options to set the item width for each breakpoint in percentage. Inherit refers to the item width on the next smaller screen size.

Panel slider item width

Alternatively, expand all items to the width of their content.

Panel slider item width mode

Set the size of the column gap between slider items. Optionally, show a divider between them.

Panel slider gap and dividers

To align the images without any gaps when using a blank panel, use a panel padding instead of the slider column gap.

Panel slider panel padding

Group slider items into sets and slide all visible items at once. The number of items within a set depends on the defined item width, e.g. 33% means that each set contains 3 items. Additionally, center the active slide, disable infinite scrolling or enable autoplay.

Option Description
Set Slide all visible items at once.
Center Center the active slide.
Finite Disable infinite scrolling.
Velocity Set the velocity in pixels per millisecond.
Autoplay Enable autoplay and optionally pause autoplay on hover.
Interval Set the autoplay interval in seconds.
Parallax Add a stepless parallax animation based on the scroll position.
Parallax Target The animation starts and stops depending on the element position in the viewport. Alternatively, use the position of a parent container.
Parallax Start / End The parallax animation starts when the element enters the viewport and ends when it leaves the viewport. Optionally, set a start and end offset, e.g. 100px, 50vh or 50vh + 50%. Percent relates to the element's height.

Panel slider animation

Add a dotnav navigation and define its position and margin.

Option Description
Type Choose the navigation type.
Position Align the navigation items.
Margin Set the vertical margin.
Breakpoint Display the navigation only on this device width and larger.
Color Set light or dark color mode.

Panel slider navigation

Add an additional slidenav to navigate to the previous and next slides.

Option Description
Position Select the position of the slidenav. Optionally, only show the slidenav on hover and choose a larger style.
Margin Apply a margin between the slidenav and the slider container.
Breakpoint Display the slidenav only on this device width and larger.
Color Set light or dark color mode.
Outside Breakpoint Display the slidenav outside only on this device width and larger. Otherwise, display it inside.
Outside Color Set light or dark color if the slidenav is outside.

Panel slider slidenav

Additionally, there are options to match panel heights and to expand the height of the image, content or both to fill the available space in the panel and push the link to the bottom.

Panel slider height and expand content

Since the Panel element displays multiple panels, their settings are explained in the Panel element documentation. Options for the different content fields are very similar across all elements. They are described in the corresponding Headline, Text, Image, Icon and Button elements.


Popover Element

The Popover element displays an image with markers which open popovers. The element itself has an Image field while its items have Title, Meta, Content, Image and Link fields. Take a look at the popover element demo for a detailed showcase.

Show Popover Demo

Set the horizontal and vertical position of the popover marker for each item.

Option Description
Left Enter the horizontal position of the marker in percent.
Top Enter the vertical position of the marker in percent.

Popover marker

Choose whether the popover opens when clicking the marker or hovering it.

Option Description
Marker Color Set light or dark color mode.
Mode Display the popover on click or hover.

Popover marker color and mode

Position the popover to the top, bottom, left or right in regard to its marker. Each item can have a different position. If the popover doesn't fit the viewport, it will flip automatically.

Popover position

Set the width for the popover in pixels.

Popover width

Define the padding between the popover card and its content. Optionally, the image can be aligned without any padding.

Option Description
Padding Define the card size by selecting the padding between the card and its content.
Align Image Without Padding Attach the image to the drop's edge.

Popover padding

Popover image padding

In addition to the default style, the popover comes in primary and secondary card styles.

Popover style

There are various options to link the Popover element. Either link the title, image and button separately or link the whole card. Additionally, set hover styles for the title. These styles are kept even if the whole card is linked.

Popover Option Description
Link Link the whole card if a link exists.

Popover link

Title Option Description
Link Link the title if a link exists.
Hover Style Set the hover style for a linked title.

Popover title link

Image Option Description
Link Link the title if a link exists.

Popover image link

Options for the different content fields are very similar across all elements. They are described in the corresponding Headline, Text, Image and Button element documentation.


Slideshow Element

The Slideshow element displays an image slideshow with text overlays. It has Image, Video, Title, Meta, Content, Link and Navigation Thumbnail fields. Take a look at the slideshow element demo for a detailed showcase.

Show Slideshow Demo

The Slideshow element has several options to define its size.

Option Description
Height The slideshow always takes up the full width, and the height will adapt automatically based on the defined ratio. Optionally, subtract the height above the slideshow. Alternatively, the height can adapt to the height of the viewport. Make sure no height is set in the section settings when using one of the viewport options.
Ratio Set the slideshow ratio. It's recommended to use the same ratio as the image or video file. Simply use its width and height, e.g. 1600:900.
Min Height Use an optimal minimum height to prevent the slideshow to become smaller than its content on small devices.
Max Height Set the maximum height.

Slideshow height

Additionally, set the text color of the content and navigation to either light or dark.

Slideshow text color

Set a box shadow or a box decoration for the slideshow. Additionally, select a floating shadow or a mask as a box decoration.

Option Description
Box Shadow Select the slideshow's box shadow size.
Box Decoration Select the image's box decoration style.
Inverse Style Inverse the box decoration style.

Slideshow box shadow and decoration

Choose one of the different slideshow transitions and add an additional Ken Burns animation for the image.

Option Description
Transition Select the transition between two slides.
Velocity Set the velocity in pixels per millisecond.
Autoplay Enable autoplay and optionally pause autoplay on hover.
Interval Set the autoplay interval in seconds.
Parallax Add a stepless parallax animation based on the scroll position.
Parallax Target The animation starts and stops depending on the element position in the viewport. Alternatively, use the position of a parent container.
Parallax Start / End The parallax animation starts when the element enters the viewport and ends when it leaves the viewport. Optionally, set a start and end offset, e.g. 100px, 50vh or 50vh + 50%. Percent relates to the element's height.
Ken Burns Select the transformation origin for the Ken Burns animation.
Duration Set the duration for the Ken Burns effects in seconds.

Slideshow animation

Add a dotnav or a thumbnav navigation and define its position, margin and color. If the thumbnav is selected, set the width and the height for the thumbnail image. Optionally, select a different image for the thumbnail.

Option Description
Type Select the navigation type. Additionally, show the navigation below the slideshow or use vertical navigation.
Position Select the position of the navigation.
Margin Apply a margin between the navigation and the slideshow container.
Breakpoint Display the navigation only on this device width and larger.
Color Set light or dark color if the navigation is below the slideshow.
Thumbnail Width/Height Set the width and height for the thumbnail image.
Thumbnav Wrap Define whether thumbnails wrap into multiple lines if the container is too small.
Thumbnav Inline SVG Inject SVG images into the page markup so that they can easily be styled with CSS.
Thumbnav SVG Color Select the SVG color. It will only apply to supported elements defined in the SVG.

Slideshow navigation

Add an additional slidenav to navigate to the previous and next slides.

Option Description
Position Select the position of the slidenav. Optionally, only show the slidenav on hover and choose a larger style.
Margin Apply a margin between the slidenav and the slideshow container.
Breakpoint Display the slidenav only on this device width and larger.
Color Set light or dark color mode.
Outside Breakpoint Display the slidenav outside only on this device width and larger. Otherwise, display it inside.
Outside Color Set light or dark color if the slidenav is outside.

Slideshow slidenav

The slideshow images can have a text overlay. Define its position, style and width. If no width is set in the section or row, and the slideshow takes the full width, its overlay text can be aligned in the same way as a section container.

Option Description
Container Width Set the maximum content width. Note that the section may already have a maximum width which you cannot exceed.
Container Padding Set the vertical container padding to position the overlay.
Margin Set the margin between the overlay and the slideshow container. the margin between the overlay and the slideshow container.
Position Select the content position.
Style Select a style for the overlay.
Padding Set the padding between the overlay and its content.
Width Set a fixed width.
Animation Choose between a parallax depending on the scroll position or an animation, which is applied once the slide is active.

Slideshow overlay

Instead of an overlay transition, create a parallax effect by moving the overlay, title, meta, content and link at different speeds while sliding between the slideshow items.

Slideshow parallax

Option Description
Horizontal Start/End Define the start and end offset of the horizontal parallax in pixels.
Vertical Start/End Define the start and end offset of the vertical parallax in pixels.
Scale Start/End Define the start and end offset of the scale parallax in pixels.
Rotate Start/End Define the start and end offset of the rotate parallax in pixels.
Opacity Start/End Define the start and end offset opacity parallax in pixels.

Options for the different content fields are very similar across all elements. They are described in the corresponding Image, Headline, Text and Button elements.


Social Element

The Social element displays icons linking to social media profiles. It has Link, Icon and Image fields. If available, a corresponding UIkit brand icon will be displayed automatically. Links to Google Maps, email addresses and phone numbers, like mailto:info@example.com or tel:+491570156, are also supported. Alternatively, pick a different icon or an SVG image. Take a look at the social element demo for a detailed showcase.

Show Social Demo

Socials have various style options. They can look like a button, link, iconnav or a thumbnav.

Social icons style

Socials can be displayed in a horizontal or a vertical grid layout. Additionally, define the breakpoint for the vertical layout from which socials will align side by side and set the gap between grid items.

Option Description
Grid Choose between a horizontal or a vertical grid layout.
Grid Breakpoint Set the breakpoint from which grid items will align side by side.
Column Gap Set the size of the gap between the grid columns.
Row Gap Set the size of the gap between the grid rows.

Social grid

Open the social links in a new window and add an option ARIA label.

Option Description
Link Target Open the link in a new window.
ARIA Label Enter a descriptive text label to make it accessible if the link has no visible text.

Social link target

Set the width and height for the social icons in pixels.

Social icon width and height

SVG images can be injected into the page markup and further styled with CSS.

Social SVG images


The Subnav element displays a horizontal navigation. It has Content and Link fields. Take a look at the subnav element demo for a detailed showcase.

Show Subnav Demo

The subnav has various navigation styles.

Subnav style

Optionally define which item should be the active item.

Subnav active item


Switcher Element

The Switcher element displays a tabbed navigation which transitions through content slides. It has Title, Meta, Content, Image, Link, Navigation Label and Navigation Thumbnail fields. Take a look at the switcher element demo for a detailed showcase.

Show Switcher Demo

Choose one of the different switcher animations. Optionally, expand all content slides to the same height to prevent subsequent content from jumping when switching between slides and set the maximum item width.

Switcher animation and match height

Add a tab, subnav or a thumbnav navigation and select its position and alignment in regard to the content. If aligned to the left or right, the navigation column width can be the same size as its items, a fixed width or percentage. Additionally, define the grid gaps and set the breakpoint from which the navigation stacks.

Switcher Option Description
Style Select the navigation type. The pill and divider styles are only available for horizontal subnavs.
Position Position the navigation at the top, bottom, left or right. A larger style can be applied to left and right navigation.
Alignment Align the navigation items.
Margin Set the vertical margin.
Grid Width Define the width of the navigation. Choose between percent and fixed widths or expand columns to the width of their content.
Column Gap Set the size of the gap between between the navigation and the content.
Row Gap Set the size of the gap if the grid items stack.
Grid Breakpoint Set the breakpoint from which grid items will stack.
Vertical Alignment Vertically center the navigation and content.

Switcher navigation

If the thumbnav is selected, set the width and the height for the thumbnail image. Optionally, select a different image for the thumbnail.

Option Description
Thumbnav Wrap Define whether thumbnails wrap into multiple lines if the container is too small.
Thumbnail Width/Height Set the width and height for the thumbnail image.
Thumbnav Inline SVG Inject SVG images into the page markup so that they can easily be styled with CSS.
Thumbnav SVG Color Select the SVG color. It will only apply to supported elements defined in the SVG.

Switcher thumbnav navigation

The switcher item image can be aligned in regard to the content. If aligned to the left or right, the image column width can be the same size as the image, a fixed width or percentage. Additionally, define the grid gaps and set the breakpoint from which the image stacks.

Image Option Description
Alignment Align the image to the top, left, right or place it between the title and the content.
Grid Width Define the width of the image within the grid. Choose between percent and fixed widths or expand columns to the width of their content.
Grid Column Gap Set the size of the gap between the image and the content.
Grid Row Gap Set the size of the gap if the grid items stack.
Grid Breakpoint Set the breakpoint from which grid items will stack.
Vertical Alignment Vertically center grid items.

Switcher image alignment

Options for the different content fields are very similar across all elements. They are described in the corresponding Panel, Headline, Text, Image and Button elements.


Table Element

The Table element displays a table. It has Title, Meta, Content, Image and Link fields. Optionally, set a table header for each content field. Take a look at the table element demo for a detailed showcase.

Show Table Demo

The Table element has various style options. Choose between the default, divider or a striped table. Optionally, highlight the hovered row and remove its left and right padding.

Table style

Choose the column order for the Title, Meta, Content, Image and Link fields. Additionally, align the content in the table cells and set their padding.

Table Option Description
Size Define the padding between table rows.
Order Define the order of the table cells.
Vertical Alignment Vertically align table cells.

Table size and order

Set the width of the title, meta and content columns. Choose between a fixed width, shrink the width to fit its content or expand the width to fill the remaining space. If all columns have a fixed width, the remaining space will be distributed equally among them.

Table width

Choose whether the table should stack on small viewports or enable overflow scroll for the container.

Table responsive

Set the alignment for the last column.

Table last column alignment

Options for the different content fields are very similar across all elements. They are described in the corresponding Headline, Text, Image and Button elements.

YOOtheme Pro Documentation